Skip to main content

Configuration file

To configure Remotion, create a remotion.config.ts file in the root of your Remotion project.

These options will apply to CLI commands such as npx remotion studio and npx remotion render.

warning

The configuration file has no effect when using SSR APIs.

You can control several behaviors of Remotion here.

remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
 
Config.setConcurrency(8);
Config.setPixelFormat('yuv444p');
Config.setCodec('h265');
remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
 
Config.setConcurrency(8);
Config.setPixelFormat('yuv444p');
Config.setCodec('h265');

overrideWebpackConfig()v1.1.0

Allows you to insert your custom Webpack config. See the page about custom Webpack configs for more information.

remotion.config.ts
ts
Config.overrideWebpackConfig((currentConfiguration) => {
// Return a new Webpack configuration
return {
...currentConfiguration,
// new configuration
};
});
remotion.config.ts
ts
Config.overrideWebpackConfig((currentConfiguration) => {
// Return a new Webpack configuration
return {
...currentConfiguration,
// new configuration
};
});

setCachingEnabled()v2.0.0

Enable or disable Webpack caching. Default is true which will make the Webpack step in the first run a bit slower but will massively speed up subsequent runs.

remotion.config.ts
ts
Config.setCachingEnabled(false);
remotion.config.ts
ts
Config.setCachingEnabled(false);

The command line flag --bundle-cache will take precedence over this option.

setStudioPort()v4.0.61

Set the HTTP port for the Studio.

remotion.config.ts
ts
Config.setStudioPort(3003);
remotion.config.ts
ts
Config.setStudioPort(3003);

The command line flag --port will take precedence over this option.

setRendererPort()v4.0.61

Set the port to be used to host the Webpack bundle.

remotion.config.ts
ts
Config.setStudioPort(3004);
remotion.config.ts
ts
Config.setStudioPort(3004);

The command line flag --port will take precedence over this option.

setPublicDir()v3.2.13

Define the location of the public/ directory. If not defined, Remotion will assume the location is the `public` folder in your Remotion root.
remotion.config.ts
ts
Config.setPublicDir('./custom-public-dir');
remotion.config.ts
ts
Config.setPublicDir('./custom-public-dir');

The command line flag --public-dir will take precedence over this option.

setEntryPoint()v3.2.40

Sets the Remotion entry point, you don't have to specify it for CLI commands.

remotion.config.ts
ts
Config.setEntryPoint('./src/index.ts');
remotion.config.ts
ts
Config.setEntryPoint('./src/index.ts');

If you pass an entry point as a CLI argument, it will take precedence.

setLevel()v2.0.1

Increase or decrease the amount of log messages in the CLI. Acceptable values:

  • error: Silent except error messages.
  • warn: Only showing errors and warnings.
  • info (default): Default output - besides errors and warnings, prints progress and output location.
  • verbose: All of the above, plus browser logs and other debug info.
remotion.config.ts
ts
Config.setLevel('verbose');
remotion.config.ts
ts
Config.setLevel('verbose');

The command line flag --log will take precedence over this option.

setMaxTimelineTracks()v2.1.10

Set how many tracks are being displayed in the timeline in the Studio at most. This does not affect your video, just the amount of tracks shown when previewing. Default 15.

remotion.config.ts
ts
Config.setMaxTimelineTracks(20);
remotion.config.ts
ts
Config.setMaxTimelineTracks(20);

setKeyboardShortcutsEnabled()v3.2.11

Whether the Studio should react to keyboard shortcuts. Default true.

remotion.config.ts
ts
Config.setKeyboardShortcutsEnabled(false);
remotion.config.ts
ts
Config.setKeyboardShortcutsEnabled(false);

The command line flag --disable-keyboard-shortcuts will take precedence over this option.

setWebpackPollingInMilliseconds()v3.3.11

Enables Webpack polling instead of the file system event listeners for hot reloading. This is useful if you are inside a virtual machine or have a remote file system.

remotion.config.ts
ts
Config.setWebpackPollingInMilliseconds(1000);
remotion.config.ts
ts
Config.setWebpackPollingInMilliseconds(1000);

The command line flag --webpack-poll will take precedence over this option.

setNumberOfSharedAudioTags()v3.3.2

How many shared audio tags should be mounted in the Studio. Shared audio tags can help prevent playback issues due to audio autoplay policies of the browser. See this article which covers the same option but for the Player. Default 0, meaning no autoplay policies are circumvented.

remotion.config.ts
ts
Config.setNumberOfSharedAudioTags(5);
remotion.config.ts
ts
Config.setNumberOfSharedAudioTags(5);

setShouldOpenBrowser()v3.3.19

Whether Remotion should open a browser when starting the Studio. Default true.

remotion.config.ts
ts
Config.setShouldOpenBrowser(false);
remotion.config.ts
ts
Config.setShouldOpenBrowser(false);

setBrowserExecutable()v1.5.0

Set a custom Chrome or Chromium executable path. By default Remotion will try to find an existing version of Chrome on your system and if not found, it will download one. This flag is useful if you don't have Chrome installed in a standard location and you want to prevent downloading an additional browser or need support for the H264 codec.

remotion.config.ts
ts
Config.setBrowserExecutable('/usr/bin/google-chrome-stable');
remotion.config.ts
ts
Config.setBrowserExecutable('/usr/bin/google-chrome-stable');

The command line flag --browser-executable will take precedence over this option.

setDelayRenderTimeoutInMilliseconds()v2.6.3

previously named "setTimeoutInMilliseconds"

Define how long a single frame may take to resolve all delayRender() calls before it times out. Default: 30000

remotion.config.ts
ts
Config.setDelayRenderTimeoutInMilliseconds(60000);
remotion.config.ts
ts
Config.setDelayRenderTimeoutInMilliseconds(60000);

The command line flag --timeout will take precedence over this option.

setChromiumDisableWebSecurity()v2.6.5

This will most notably disable CORS among other security features during rendering.

remotion.config.ts
tsx
Config.setChromiumDisableWebSecurity(true);
remotion.config.ts
tsx
Config.setChromiumDisableWebSecurity(true);

The command line flag --disable-web-security will take precedence over this option.

setChromiumIgnoreCertificateErrors()v2.6.5

Results in invalid SSL certificates, such as self-signed ones, being ignored during rendering.

remotion.config.ts
tsx
Config.setChromiumIgnoreCertificateErrors(true);
remotion.config.ts
tsx
Config.setChromiumIgnoreCertificateErrors(true);

The command line flag --ignore-certificate-errors will take precedence over this option.

setChromiumHeadlessMode()v2.6.5

Deprecated - will be removed in 5.0.0. With the migration to Chrome Headless Shell, this option is not functional anymore.

If disabled, the render will open an actual Chrome window where you can see the render happen. The default is headless mode.
remotion.config.ts
tsx
Config.setChromiumHeadlessMode(false);
remotion.config.ts
tsx
Config.setChromiumHeadlessMode(false);

setChromiumMultiProcessOnLinux()v4.0.42

Removes the --single-process flag that gets passed to Chromium on Linux by default. This will make the render faster because multiple processes can be used, but may cause issues with some Linux distributions or if window server libraries are missing.
Default: false until v4.0.136, then true from v4.0.137 on because newer Chrome versions don't allow rendering with the --single-process flag.
This flag will be removed in Remotion v5.0.
remotion.config.ts
tsx
Config.setChromiumMultiProcessOnLinux(true);
remotion.config.ts
tsx
Config.setChromiumMultiProcessOnLinux(true);

The command line flag --enable-multiprocess-on-linux will take precedence over this option.

setChromiumOpenGlRenderer

Changelog
  • From Remotion v2.6.7 until v3.0.7, the default for Remotion Lambda was swiftshader, but from v3.0.8 the default is swangle (Swiftshader on Angle) since Chrome 101 added support for it.
  • From Remotion v2.4.3 until v2.6.6, the default was angle, however it turns out to have a small memory leak that could crash long Remotion renders.

Select the OpenGL renderer backend for Chromium.
Accepted values:

  • "angle"
  • "egl"
  • "swiftshader"
  • "swangle"
  • "vulkan" (from Remotion v4.0.41)
  • "angle-egl" (from Remotion v4.0.51)

The default is null, letting Chrome decide, except on Lambda where the default is "swangle"

remotion.config.ts
tsx
Config.setChromiumOpenGlRenderer('angle');
remotion.config.ts
tsx
Config.setChromiumOpenGlRenderer('angle');

The command line flag --gl will take precedence over this option.

setConcurrency()

Sets how many Puppeteer instances will work on rendering your video in parallel. Default: null, meaning half of the threads available on your CPU.

remotion.config.ts
ts
Config.setConcurrency(8);
remotion.config.ts
ts
Config.setConcurrency(8);

The command line flag --concurrency will take precedence over this option.

tip

Try to set your concurrency to os.cpus().length to all the threads available on your CPU for faster rendering. The drawback is that other parts of your system might slow down.

setVideoImageFormat()v4.0.0

Determines which in which image format to render the frames. Either:

  • jpeg - the fastest option (default)
  • png - slower, but supports transparency
  • none - don't render images, just calculate audio information
remotion.config.ts
ts
Config.setVideoImageFormat('png');
remotion.config.ts
ts
Config.setVideoImageFormat('png');

setStillImageFormat()v4.0.0

Determines which in which image format to render the frames. Either:

  • png (default)
  • jpeg
  • pdf
  • webp
remotion.config.ts
ts
Config.setStillImageFormat('pdf');
remotion.config.ts
ts
Config.setStillImageFormat('pdf');

setImageFormat()v1.4.0

Removed in v4.0

Replaced in v4.0 with setVideoImageFormat() and setStillImageFormat()

Determines which in which image format to render the frames. Either:

  • jpeg - the fastest option (default from v1.1)
  • png - slower, but supports transparency
  • none - don't render images, just calculate audio information (available from v2.0)
remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
// ---cut---
Config.setImageFormat('png');
remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
// ---cut---
Config.setImageFormat('png');

The command line flag --image-format will take precedence over this option.

setScale()v2.6.7

Scales the output frames by the factor you pass in. For example, a 1280x720px frame will become a 1920x1080px frame with a scale factor of 1.5. Vector elements like fonts and HTML markups will be rendered with extra details. Default: 1.

remotion.config.ts
ts
Config.setScale(2);
remotion.config.ts
ts
Config.setScale(2);

The command line flag --scale will take precedence over this option.

setMuted()v3.2.1

Disables audio output. Default false.

remotion.config.ts
ts
Config.setMuted(true);
remotion.config.ts
ts
Config.setMuted(true);

The command line flag --muted will take precedence over this option.

setEnforceAudioTrack()v3.2.1

Render a silent audio track if there would be none otherwise. Default false.

remotion.config.ts
ts
Config.setEnforceAudioTrack(true);
remotion.config.ts
ts
Config.setEnforceAudioTrack(true);

The command line flag --enforce-audio-track will take precedence over this option.

setForSeamlessAacConcatenation()v4.0.123

If enabled, the audio is trimmed to the nearest AAC frame, which is required for seamless concatenation of AAC files. This is a requirement if you later want to combine multiple video snippets seamlessly.

This option is used internally. There is currently no documentation yet for to concatenate the audio chunks.
remotion.config.ts
ts
Config.setForSeamlessAacConcatenation(true);
remotion.config.ts
ts
Config.setForSeamlessAacConcatenation(true);

The command line flag --for-seamless-aac-concatenation will take precedence over this option.

setFrameRange()v2.0.0

Pass a number to render a still frame or a tuple to render a subset of a video. The frame sequence is zero-indexed.

remotion.config.ts
ts
Config.setFrameRange(90); // To render only the 91st frame
remotion.config.ts
ts
Config.setFrameRange(90); // To render only the 91st frame

or

remotion.config.ts
ts
Config.setFrameRange([0, 20]); // Render a video only containing the first 21 frames
remotion.config.ts
ts
Config.setFrameRange([0, 20]); // Render a video only containing the first 21 frames

The command line flag --frames will take precedence over this option.

setJpegQuality()

The JPEG quality of each frame. Must be a number between 0 and 100. Will not work if you render PNG frames. Default: 80.

remotion.config.ts
ts
Config.setJpegQuality(90);
remotion.config.ts
ts
Config.setJpegQuality(90);

The command line flag --jpeg-quality will take precedence over this option.

setQuality()

Renamed to setJpegQuality in v4.0.0.

setDotEnvLocation()

Set a custom location for a .env file. You can specify an absolute path or a relative path in which case it gets resolved based on the current working directory.

remotion.config.ts
ts
Config.setDotEnvLocation('.my-env');
remotion.config.ts
ts
Config.setDotEnvLocation('.my-env');

The command line flag --env-file will take precedence over this option.

setEveryNthFrame()

This option may only be set when rendering GIFs. It determines how many frames are rendered, while the other ones gets skipped in order to lower the FPS of the GIF.

For example, if the fps is 30, and everyNthFrame is 2, the FPS of the GIF is 15.

remotion.config.ts
ts
Config.setEveryNthFrame(2);
remotion.config.ts
ts
Config.setEveryNthFrame(2);

The command line flag --every-nth-frame will take precedence over this option.

setNumberOfGifLoops()

Allows you to set the number of loops as follows:
  • null (or omitting in the CLI) plays the GIF indefinitely.
  • 0 disables looping
  • 1 loops the GIF once (plays twice in total)
  • 2 loops the GIF twice (plays three times in total) and so on.
remotion.config.ts
ts
Config.setNumberOfGifLoops(2);
remotion.config.ts
ts
Config.setNumberOfGifLoops(2);

The command line flag --number-of-gif-loops will take precedence over this option.

setOutputLocation()v3.1.6

Set the output location of the video or still, relative to the current working directory. The default is out/{composition}.{container}. For example, out/HelloWorld.mp4.

remotion.config.ts
ts
Config.setOutputLocation('out/video.mp4');
remotion.config.ts
ts
Config.setOutputLocation('out/video.mp4');

If you pass another argument to the render command, it will take precedence: npx remotion render src/index.ts HelloWorld out/video.mp4.

setOverwriteOutput()

Set this to false to prevent overwriting Remotion outputs when they already exists.

remotion.config.ts
ts
Config.setOverwriteOutput(false);
remotion.config.ts
ts
Config.setOverwriteOutput(false);
info

In version 1.x, the default behavior was inverse - Remotion would not override by default.

setPixelFormat()

Controls the pixel format in FFmpeg. Read more about it here. Acceptable values: yuv420p, yuv422p, yuv444p, yuv420p10le, yuv422p10le, yuv444p10le. Since v1.4, yuva420p is also supported for transparent WebM videos. Since v2.1.7, yuva444p10le is also supported for transparent ProRes videos Default value: yuv420p

remotion.config.ts
ts
Config.setPixelFormat('yuv420p');
remotion.config.ts
ts
Config.setPixelFormat('yuv420p');

The command line flag --pixel-format will take precedence over this option.

setCodec()v1.4.0

Choose one of the supported codecs: h264 (default), h265, vp8, vp9.

  • h264 is the classic MP4 file as you know it.
  • h265 is the successor of H264, with smaller file sizes. Also known as HEVC. Poor browser compatibility.
  • vp8 is the codec for WebM.
  • vp9 is the next-generation codec for WebM. Lower file size, longer compression time.
  • prores is a common codec if you want to import the output into another video editing program (available from v2.1.6)
  • mp3 will export audio only as an MP3 file (available from v2.0)
  • wav will export audio only as an WAV file (available from v2.0)
  • aac will export audio only as an AAC file (available from v2.0)
remotion.config.ts
ts
Config.setCodec('h265');
remotion.config.ts
ts
Config.setCodec('h265');

The command line flag --codec will take precedence over this option.

See also: Encoding guide

setAudioCodec()

remotion.config.ts
ts
Config.setAudioCodec('pcm-16');
remotion.config.ts
ts
Config.setAudioCodec('pcm-16');

Choose the encoding of your audio.

  • The default is dependent on the chosen codec.
  • Choose pcm-16 if you need uncompressed audio.
  • Not all video containers support all audio codecs.
  • This option takes precedence if the codec option also specifies an audio codec.

The command line flag --audio-codec will take precedence over this option.

Refer to the Encoding guide to see defaults and supported combinations.

setProResProfile()v2.1.6

Set the ProRes profile. This option is only valid if the codec has been set to prores. Possible values: 4444-xq, 4444, hq, standard, light, proxy. See here for explanation of possible values. Default: hq

remotion.config.ts
ts
Config.setProResProfile('4444');
remotion.config.ts
ts
Config.setProResProfile('4444');

The command line flag --prores-profile will take precedence over this option.

setX264Preset()v4.2.2

Set the Preset profile. This option is only valid if the codec has been set to h264. Possible values: superfast, veryfast, faster, fast, medium, slow, slower, veryslow, placebo, Default: medium

remotion.config.ts
ts
Config.setX264Preset('fast');
remotion.config.ts
ts
Config.setX264Preset('fast');

The command line flag --prores-profile will take precedence over this option.

See also: Encoding guide, Transparent videos

setImageSequence()v1.4.0

Set to true if you want to output an image sequence instead of a video.

remotion.config.ts
ts
Config.setImageSequence(true);
remotion.config.ts
ts
Config.setImageSequence(true);

The command line flag --sequence will take precedence over this option.

overrideHeight()v3.2.40

Overrides the height of the rendered video.

remotion.config.ts
ts
Config.overrideHeight(600);
remotion.config.ts
ts
Config.overrideHeight(600);

The command line flag --height will take precedence over this option. (see h264 validation?)

overrideWidth()v3.2.40

Overrides the width of the rendered video.

remotion.config.ts
ts
Config.overrideWidth(900);
remotion.config.ts
ts
Config.overrideWidth(900);

The command line flag --width will take precedence over this option

setOutputFormat()

Removed in v4.0.0 Deprecated. Use setCodec() and setImageSequence() instead.

Either 'mp4' or 'png-sequence'.

remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
// ---cut---
Config.setOutputFormat('mp4');
remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
// ---cut---
Config.setOutputFormat('mp4');

The command line flags --sequence and --codec will take precedence over this option.

The command line flag --quality will take precedence over this option.

setCrf()v1.4.0

The "Constant Rate Factor" (CRF) of the output. Use this setting to tell FFmpeg how to trade off size and quality.

Ranges for CRF scale, by codec:

  • h264 crf range is 1-51 where crf 18 is default.
  • h265 crf range is 0-51 where crf 23 is default.
  • vp8 crf range is 4-63 where crf 9 is default.
  • vp9 crf range is 0-63 where crf 28 is default.

The lowest value is lossless, and the highest value is the worst quality possible. Higher values decrease the filesize at the cost of quality.

The range is exponential, so increasing the CRF value +6 results in roughly half the bitrate / file size, while -6 leads to roughly twice the bitrate.

Choose the highest CRF value that still provides an acceptable quality. If the output looks good, then try a higher value. If it looks bad, choose a lower value.

remotion.config.ts
ts
Config.setCrf(16);
remotion.config.ts
ts
Config.setCrf(16);

The command line flag --crf will take precedence over this option.

setVideoBitrate()v3.2.32

Specify the target bitrate for the generated video. The syntax for FFmpeg's-b:v parameter should be used. FFmpeg may encode the video in a way that will not result in the exact video bitrate specified. Example values: 512K for 512 kbps, 1M for 1 Mbps.
remotion.config.ts
ts
Config.setVideoBitrate('1M');
remotion.config.ts
ts
Config.setVideoBitrate('1M');

The command line flag --video-bitrate will take precedence over this option.

setEncodingBufferSize()v4.0.78

The value for the -bufsize flag of FFmpeg. Should be used in conjunction with the encoding max rate flag.
remotion.config.ts
ts
Config.setEncodingBufferSize('10000k');
remotion.config.ts
ts
Config.setEncodingBufferSize('10000k');

The command line flag --buffer-size will take precedence over this option.

setEncodingMaxRate()v4.0.78

The value for the -maxrate flag of FFmpeg. Should be used in conjunction with the encoding buffer size flag.
remotion.config.ts
ts
Config.setEncodingMaxRate('5000k');
remotion.config.ts
ts
Config.setEncodingMaxRate('5000k');

The command line flag --max-rate will take precedence over this option.

setAudioBitrate()v3.2.32

Specify the target bitrate for the generated video. The syntax for FFmpeg's -b:a parameter should be used. FFmpeg may encode the video in a way that will not result in the exact audio bitrate specified. Example values: 512K for 512 kbps, 1M for 1 Mbps. Default: 320k
remotion.config.ts
ts
Config.setAudioBitrate('128K');
remotion.config.ts
ts
Config.setAudioBitrate('128K');

The command line flag --audio-bitrate will take precedence over this option.

setEnableFolderExpiry()v4.0.32

When deploying sites, enable or disable S3 Lifecycle policies which allow for renders to auto-delete after a certain time. Default is null, which does not change any lifecycle policies of the S3 bucket. See: Lambda autodelete.

remotion.config.ts
ts
Config.setEnableFolderExpiry(true);
remotion.config.ts
ts
Config.setEnableFolderExpiry(true);

setLambdaInsights()v4.0.115

Enable Lambda Insights in AWS CloudWatch. For this to work, you may have to update your role permission.

remotion.config.ts
ts
Config.setLambdaInsights(true);
remotion.config.ts
ts
Config.setLambdaInsights(true);

setDeleteAfter()v4.0.32

Automatically delete the render after a certain period. Accepted values are 1-day, 3-days, 7-days and 30-days.
For this to work, your bucket needs to have lifecycles enabled.

remotion.config.ts
ts
Config.setDeleteAfter('3-days');
remotion.config.ts
ts
Config.setDeleteAfter('3-days');

setBeepOnFinish()v4.0.84

Whether the Remotion Studio tab should beep when the render is finished.

remotion.config.ts
ts
Config.setBeepOnFinish(true);
remotion.config.ts
ts
Config.setBeepOnFinish(true);

The command line flag --beep-on-finish will take precedence over this option.

setBufferStateDelayInMilliseconds()v4.0.111

Set the amount of milliseconds after which the Player in the Studio will display a buffering UI after the Player has entered a buffer state. Default 300.

remotion.config.ts
ts
Config.setBufferStateDelayInMilliseconds(0);
remotion.config.ts
ts
Config.setBufferStateDelayInMilliseconds(0);

setBinariesDirectory?v4.0.120

The directory where the platform-specific binaries and libraries that Remotion needs are located. Those include an ffmpeg and ffprobe binary, a Rust binary for various tasks, and various shared libraries. If the value is set to null, which is the default, then the path of a platform-specific package located at node_modules/@remotion/compositor-* is selected.
This option is useful in environments where Remotion is not officially supported to run like bundled serverless functions or Electron.
remotion.config.ts
ts
Config.setBinariesDirectory('/path/to/custom/directory');
remotion.config.ts
ts
Config.setBinariesDirectory('/path/to/custom/directory');

setPreferLosslessAudio?v4.0.123

Uses a lossless audio codec, if one is available for the codec. If you setaudioCodec, it takes priority over preferLossless.
remotion.config.ts
ts
Config.setPreferLosslessAudio(true);
remotion.config.ts
ts
Config.setPreferLosslessAudio(true);

overrideFfmpegCommand()v3.2.22

Modifies the FFmpeg command that Remotion uses under the hood. It works reducer-style, meaning that you pass a function that takes a command as an argument and returns a new command.

remotion.config.ts
tsx
Config.overrideFfmpegCommand(({args}) => {
// Define the custom FFmpeg options as an array of strings
const customFfmpegOptions = [
'-profile:v',
'main',
'-video_track_timescale',
'90000',
'-color_primaries',
'bt709',
'-color_trc',
'bt709',
'-strict',
'experimental',
];
// The customFfmpegOptions are inserted before the last element to ensure
// they appear before the ffmpeg's output path
args.splice(args.length - 1, 0, ...customFfmpegOptions);
return args;
});
remotion.config.ts
tsx
Config.overrideFfmpegCommand(({args}) => {
// Define the custom FFmpeg options as an array of strings
const customFfmpegOptions = [
'-profile:v',
'main',
'-video_track_timescale',
'90000',
'-color_primaries',
'bt709',
'-color_trc',
'bt709',
'-strict',
'experimental',
];
// The customFfmpegOptions are inserted before the last element to ensure
// they appear before the ffmpeg's output path
args.splice(args.length - 1, 0, ...customFfmpegOptions);
return args;
});

The function you pass must accept an object as it's only parameter which contains the following properties:

  • type: Either "stitcher" or "pre-stitcher". If enough memory and CPU is available, Remotion may use parallel rendering and encoding, which means that a pre-stitcher process gets spawned before all frames are rendered. You can tell whether parallel encoding is enabled by adding --log=verbose to your render command.
  • args: An array of strings that is passed as arguments to the FFmpeg command.

Your function must return a modified array of strings.

warning

Using this feature is discouraged. Before using it, we want to make you aware of some caveats:

  • The render command can change with any new Remotion version, even when it is a patch upgrade. This might break your usage of this feature.
  • Depending on the selected codec, available CPU and RAM, Remotion may or may not use "parallel encoding" which will result in multiple FFmpeg commands being executed. Your function must be able to handle being called multiple times.
  • The FFmpeg binary provided by Remotion supports only a small subset of FFmpeg commands, therefore not every passed option will be applied.
  • This feature is not available when using Remotion Lambda.

Before you use this hack, reach out to the Remotion team on Discord and ask us if we are open to implement the feature you need in a clean way - we often do implement new features quickly based on users feedback.

setFfmpegExecutable()

removed in v4.0

Allows you to use a custom FFmpeg binary. Must be an absolute path. By default, this is null and the FFmpeg in PATH will be used.

remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
// ---cut---
Config.setFfmpegExecutable('/path/to/custom/ffmpeg');
remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
// ---cut---
Config.setFfmpegExecutable('/path/to/custom/ffmpeg');

The command line flag --ffmpeg-executable will take precedence over this option.

setFfprobeExecutable()

removed in v4.0

Allows you to use a custom ffprobe binary. Must be an absolute path. By default, this is null and the ffprobe in PATH will be used.

remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
// ---cut---
Config.setFfprobeExecutable('/path/to/custom/ffprobe');
remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
// ---cut---
Config.setFfprobeExecutable('/path/to/custom/ffprobe');

The command line flag --ffprobe-executable will take precedence over this option.

setPort()

deprecated in v4.0.61 - use setStudioPort() and setRendererPort() instead.

Define on which port Remotion should start it's HTTP servers.
By default, Remotion will try to find a free port.
If you specify a port, but it's not available, Remotion will throw an error.

warning

Setting this option will break rendering in the Remotion Studio, because this option controls two settings at the same time:

Use the options individually.

remotion.config.ts
ts
Config.setPort(3003);
remotion.config.ts
ts
Config.setPort(3003);

The command line flag --port will take precedence over this option. If set on npx remotion studio, it will set the Studio port, otherwise the renderer port.

Importing ES Modules

The config file gets executed in a CommonJS environment. If you want to import ES modules to override the Webpack config, you can pass an async function to Config.overrideWebpackConfig():

remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
 
Config.overrideWebpackConfig(async (currentConfiguration) => {
const {enableSass} = await import('./src/enable-sass');
return enableSass(currentConfiguration);
});
remotion.config.ts
ts
import {Config} from '@remotion/cli/config';
 
Config.overrideWebpackConfig(async (currentConfiguration) => {
const {enableSass} = await import('./src/enable-sass');
return enableSass(currentConfiguration);
});

Old config file format

In v3.3.39, a new config file format was introduced which flattens the options so they can more easily be discovered using TypeScript autocompletion.

Previously, each config option was two levels deep:

remotion.config.ts
ts
Config.Bundling.setCachingEnabled(false);
remotion.config.ts
ts
Config.Bundling.setCachingEnabled(false);

From v3.3.39 on, all options can be accessed directly from the Config object.

remotion.config.ts
ts
Config.setCachingEnabled(false);
remotion.config.ts
ts
Config.setCachingEnabled(false);

The old way is deprecated, but will work for the foreseeable future.

See also